In partnership with Qatar Petroleum, our client Qatar Shell GTL Ltd. (Shell) is building a world scale Gas to Liquids (GTL) complex in Ras Laffan Industrial City, under an agreement with the State of Qatar. A diversified use of natural gas is emerging, adding a new dimension to traditional uses of gas by converting gas info, amongst other products, a high quality transportation fuel virtually free of sulphur and aromatics.
Qatar, with one of the largest reservoirs of gas, has the stated aim to be the GTL capital of the world.
Technician
1. Instrumentation
a. Instrumentation Field Technicians
Qualification and Experience:
The candidate should hove at least a Diploma in industrial Measurement and Control or other associated subject within the field of Instrumentation, with at least 8-10 years experience either on onshore or offshore facilities of the Oil and Gas Industry. It is required for the candidate to have knowledge of and experience with a wide variety of field instrumentation.
This shall include planned routine maintenance and unplanned maintenance in the form of troubleshooting, failure analysis and problem solving. Experience with field instrumentation interfacing with DCS, IPS and other PLC type systems is considered desirable.
b. Instrumentation QMI Technicians
Qualification and Experience:
The candidate should have at least a Diploma in Industrial Measurement and Control or other associated subject within the field of instrumentation, with at least 8-10 years experience either on onshore or offshore facilities of the Oil and Gas Industry. It is required for the candidate to have knowledge of the analytical measurement principles used and experience as Process Analyzer Technician with field process analyzers and laboratory analytical equipment for the measurement of physical and chemical properties. Knowledge and experience of toxic and flammable gas detection equipment is also required. Experience with the latest methodologies for Fiscal Metering Systems is considered desirable.
c. Instrumentation OCS and PS Technicians
Qualification and Experience:
The candidate should have at least a Diploma in Industrial Measurement and Control or other associated subject within the field of instrumentation, with at least 8-10 years experience either on onshore or offshore facilities of the Oil and Gas industry. It is required for the candidate to have knowledge of and experience with either Distributed Control System or IPS (PLC type safeguarding system) maintenance including diagnostic display analysis and understanding. It is considered beneficial where candidates have configuration and system management experience. Experience with Honeywell systems is considered desirable.
2. Mechanical Technicians
Qualification & Experience:
The candidate should have at least Diploma in Mechanical or equivalent with at least 8-10 years maintenance experience within Oil & Gas Industry for Rotating Equipment, Static Equipment (columns, vessels, valves etc.). Heat Transfer Equipment (Furnaces, Heat Exchangers etc.), Mechanical Protection devices (Relief Valves, Bursting Disc s etc.) is required. Field experience shall include planned routine maintenance and unplanned maintenance in the form of trouble shooting, failure analysis and problems solving. Experience in Condition Monitoring, Inspection/Testing of mechanical equipment is highly desirable.
3. Electrical Technicians (Field, Protection Test & Inspection)
Qualification & Experience:
The candidate should have at least Diploma in Electrical or equivalent with at least 8-10 years either onshore or offshore facilities of the Oil & Gas Industry. Knowledge & experience in Electrical Distribution, Electrical Installation, Maintenance Execution & Electrical Protection, Inspection/Testing is essential. Experience in troubleshooting and analysis of equipment failure is highly desirable.
4. Senior Laboratory Technicians
Qualification & Experience:
The candidate should have at least graduate in Chemistry or equivalent with at least 8-10 years either onshore or offshore facilities of the Oil & Gas Industry. Working experience & Sound Knowledge laboratory equipments like ICP, IC, GC, & XRF and sound knowledge of working with international standard procedures (ASTM/ISO/IP) is required. Knowledge d UMS & Quality Management System is highly desirable. The candidate should be able to explain the international standard procedures to laboratory technicians.
Shift Supervisors
A. Shift Supervisors (Process)
Qualifications & Experience:
Diploma in Chemical Engineering with 10 – 15 years operational experience in a gas plant, refinery or chemical plant.
• Have a proven track record as a shift supervisor and senior panel member, backed up by working experience in some of the main processes of o GTL or large petrochemical plant, or an offshore production facility, or a gas treatment plant.
• It s essential that you have good knowledge of computerized systems far data collection, analysis and reporting. Familiarity and experience with International Standards and/or Shell Design & Engineering Practices, and other Shell methodologies such as Flawless StartUp, HSE case, HAZOP, IPF, RCM and RBI would be an advantage.
• Experience in (pre) commissioning and startup is on advantage.
• Knowledge of computerized systems for data collection, analysis and reporting.
• Familiarity and experience with International Standards, Design & Engineering Practices, and other methodologies such as Flawless StartUp, HSE case, HAZOP, IPF, RCM and RBI.
• Responsible for supervising and leading a shift team. Coordinating with other department executing operation, plan, ensure manpower availability, maintenance activities, assessing root causes and remedies.
• During commissioning & pre-commissioning phase to develop the training programs and train operators.
• Full involvement in the Commissioning and start up SU plan.
• Create HSE environment & culture among team members, job safety analysis, PTW & aspects of HSE.
• Fluency in written and spoken English is also essential.
B. Shift Supervisors (Refinery)
Qualifications & Experience:
Diploma in Chemical Engineering with 10-15 years operational experience in a gas plant, refinery or chemical plant.
• Have a proven track record as a shift supervisor and senior panel member, backed up by working experience in some of the main processes of a REFINERY plant, (a gas treatment plant or atmospheric and vacuum distillations, hydro-cracking, hydro treating or lube oil units and storage tanks).
• It s essential that you have good knowledge of computerized systems for data collection, analysis and reporting. Familiarity and experience with International Standards and/or Shell Design & Engineering Practices, and other methodologies such as Flowless StartUp, HSE case, HAZOP, IPF, RCM and RBI would be an advantage.
• Experience in (pre) commissioning and startup is an advantage.
• Knowledge of computerized systems for data collection, analysis and reporting.
• Responsible lot supervising and leading a shift team. Coordinating with other department executing operation, plan, ensure manpower availability, maintenance activities, assessing root causes and remedies.
• During commissioning & precommissioning phase to develop the training programs and train operators.
• Full involvement in the Commissioning and start up SU plan.
• Create HSE environment & culture among team members, job safety analysis, PTW & aspects of HSE.
• Fluency in written and spoken English is also essential.
All personnel must be able to work in a multicultural environment and must be able to communicate effectively with all levels of the organization. Fluency in English both in writing and verbal is mandatory and will be tested.
Please ensure your application is sent within November 1, 2008 and meets the following requirements:
• Job applied for must be in e-mail Subject Line.
• CV maximum 3 pages must demonstrate the qualifications, knowledge and experience required and include full work history.
• Mobil phone number and personal email address must be on the CVs.
• Photos, pass-port copy, certificates and testimonial must be included.
Recruitment is being carried out by Uzma Group a specialist supplier of personnel and services to the oil and gas industry.
Address:
Uzma Group
Uzma House
No. 68 & 70, Fraser Business Park,
Jalan Metro Pudu 2, Off Jalan Yew
55200 Kuala Lumpur, Malaysia.
(514669)
qatarshell@uzmagroup.com
Recruiting on behalf of Shell
I am looking for vacencies as a senior process analyzer tech. Thank you.
i humbly apply to get a job in your company as an instrument/electrical technician with the cv below
Okeke E. Columba
No. 65 Oro Ekpo Road Rumuepirikom Port Harcourt
Mobile No.: +2347066562274 and +2348064320336
Email Address: divmed98@yahoo.com / jazz@yahoo.com
Position Desired: Electrical / Instrument Supervisor
Professional Qualification: O.N.D Holder on Electrical / Instrumentation Tech.
Educational Background
Diploma Federal Polytechnic
Yaba OJO L.G.A Logos Year 1991
Diploma Government Technical College Phalga L.G.A
Port Harcourt River State Year 1988
B-Govt Craft Development Centre Phalga L.G.A
Port Harcourt Rivers State Year 1988
B-WAEC Technical Certificate
Course Government Technical College Year 1988
Subject Course:
Power / Machinery Year 1991
B-On City and Guide of London Institute Year 1988
II & III Trade Test on Federal Trade Technology Year 1989
B-On WAEC Technical Certificate Course Year 1988
Working Experience
Company: Daewoo Engineering and Construction Company Ltd.
Address: Mesaieed City , Qatar
Position: Instrument /Electrical Foreman
Project: Qatar Chemical Company II Ltd. (QCHEM II) Ethylene Derivates Complex
Date Joined: 12-October 2008 up to Present
Company: Daewoo Engineering and Construction Company Ltd.
Address: Bonny Island River State , Nigeria
Position: Instrument / Electrical Foreman
Project: Nigerian Liquefied Natural Gas Plant Expansion
Date Joined: 26-June 2004 to 6-November 2007
Company: Technit Cimi. Montubi Nigeria Limited
Address: Bonny Island Rivers State , Nigeria
Position: Electrical Maintenance / Installation Foreman
Project: Nigeria Liquefied Natural Gas Plant Expansion Project Train 1 & 3
Date Joined: 10-August 1997 to 19-October 2003
Company: GENECO Nigerian Engineering Construction Limited
Address: No.8 Eleke Crescent , Victoria Island Lagos
Position: Technical Coordinator
Project: NNPC Butanization Project Apapa, Lagos State
Date Joined: 2-January 1995 to 3-August 1997
Company: Danelect Engineering Company Limited
Address: Plot 278 Trans Amadi Industrial Layout Port Harcourt R/S
Position: Electrical Work Shop Foreman
Project: Nigerian White Oil Refinery Kaduna North
Installation of Galba Work Shop, TY Danjuma Street Trans Amadi Agip Project Ibuocha R/S
Oloma Gas Choke Plant Bonny Shell Terminal Gas Plant Bonny
Installation of Amasoma Electrical Plant Building PH
Date Joined: 23-November 1992 to 30-July 1995
Duties and Responsibilities
in given work orders and work assignment to the technician.
Relay Orders / Scope of Works Assisting Supervisor given by the Supervisor to the Tech means.
Assist and give support to the Technician’s doing.
Co-Ordinates from the Store Keeper regarding the availability of tools and materials needed.
Check Materials and Equipment if it is compromise through the drawing and specifications.
Check all Cable connections, terminations and cable numbering will follow the same as in the drawing.
Instrument Installations such as Temperature Sensors Levels Transmitter, Pressure Transmitter, Flow Transmitter ETC.
Prepare and Installed Support for the above mentioned Items.
Others: Writing Reports regarding daily work activities / Work Accomplishments.
Cable Pulling both Electrical and Instrument including Primary and Secondary Cable
Welding machines, Electrical overhead crane and Electrical cutting machine. Drilling machine, GenSet, and Electrical Cooking Unit Handling.
Skills:
Fully conversant specification of control system with sound technical knowledge of AC & DC Motor Control Systems.
Good Communication and Supervisory Skills.
Ability to motivate a good project of team work with people of different nationalities and background
Extra Curriculum Activities:
Driving, Use to Educative games, and member of Vision Impacted Personalities Bonny Chapter. As well a delight committee of friend associate.
Personal Data:
Passport: No.A0177506
Date of Birth: 28th September 1972
Place of Birth: Phalga Ph
State of Origin : Abia State
Nationality: Nigerian
Religion: Christian
Height: 5’7″
Weight: 60 Kg
Marital Status: Married
References:
Engr. Chima Emefuruonu
LNG Qatar
Mobile No. +9746737924
Hon. Barrister Michael Uduu
Chairman Arochukwu LGA
Mobile No. 080377412284
Respected Sir,
I am qualified Diploma Engineer in Instrumentation having experience about 11 years and 6 months in the field of Maintenance and construction like Refinery/ Gas/ Petrochemical and power & Desalination Plant. Having experience in system of TDC 3000 Honeywell, centum, CS 3000 of Yokogawa, INFI 90 FOXBORO AND SCADA, ESD, ABB.
I hereby request your good self please consider my application and give me an opportunity to serve in your esteemed organization. Looking forward for earliest reply.
Thanking you.
CURRICULUM VITAE
N A M A : POENGGOENG POEDJANTORO
TANGGAL LAHIR : 21 AGUSTUS 1961
ALAMAT : JL. LONTAR NO 7 PPI SUCI MANYAR
GRESIK .INDONESIA
PERUSAHAAN : PT. PETROKIMIA GRESIK
ALAMAT PERUSAAC : JL. AHMAD YANI 1 GRESIK 61121
JABATAN : INSTRUMENT MAINTENANCE TECHNICIAN
QUALIFICATION : INSTRUMENT MAINTENANCE SENIOR
BAHASA COMMUNICATION : INDONESIA
PENDIDIKAN FORMAL : STM NEGERI 1 / ELECTRICAL SURABAYA 1982
PENGALAMAN :
# : INSTRUMENT TECHNICIAN FOR AMMONIUM SULFATE PLANT PROJECT.
RESPONSIBILITY :
• TECHNICIAN OF CALIBRATION, LOOP TESTING, INSTALLATION FIELD INSTRUMENT, FUNCTION TESTING OF FIELD INSTRUMENT AND CONTROL ROOM INSTRUMENT.
• DOING CALIBRATION, LOOP TESTING, FUNCTION TESTING, INSTALLATION FIELD INSTRUMENT AND CONTROL ROOM INSTRUMENT.
# : INSTRUMENT MAINTENANCE TECHNICIAN FOR AMMONIUM SULFATE PLANT
RESPONSIBILITY :
• PREVENTIVE MAINTENANCE
• SERVICE, REPAIR & CALIBRATION
• TROUBLE SHOOTING
# : INSTRUMENT MAINTENANCE TECHNICIAN OF AMMONIA PLANT PROJECT
RESPONSIBILITY :
• TECHNICIAN OF CALIBRATION, LOOP TESTING , INSTALLATION FIELD INSTRUMENT & CONTROL ROOM INSTRUMENT, FUNCTION TESTING SQUENCE TESTING
• DOING CALIBRATION, LOOP TESTING, FUNCTION TE STING, INSTALLATION FIELD INSTRUMENT AND CONTROL ROOM, SQUENCE TESTING
# : INSTRUMENT MAINTENANCE TECHNICIAN FOR AIR SEPARATION PLANT
RESPONSIBILITY :
• PREVENTIVE MAINTENANCE
• SERVICE, REPAIR & CALIBRATION
• TROUBLE SHOOTING
# : INSTRUMENT TECHNICIAN FOR CO2 PLANT
RESPONSIBILITY :
• TECHNICIAN OF CALIBRATION, LOOP TESTING, FUNCTION TESTING, INSTALLATION FIELD INSTRUMENT AND CONTROL ROOM INSTRUMENT & INSTALLATION CABLE AND CONDUIT
• DOING CALIBRATION, LOOP TESTING, FUNCTION TESTING, INSTALLATION FIELD INSTRUMENT & CONTROL ROOM INSTRUMENT
# : INSTRUMENT MAINTENANCE TECHNICIAN
OF CO2 & ASP PLANT.
RESPONSIBILITY :
• PREVENTIVE MAINTENANCE
• SERVICE, REPAIR & CALIBRATION
• TROUBLE SHOOTING
# : INSTRUMENT MAINTENANCE TECHNICIAN OF AMMONIUM SULFATE PLANT
RESPONSIBILITY :
• PREVENTIVE MAINTENANCE
• SERVICE, REPAIR & CALIBRATION
• TROUBLE SHOOTING
# : INSTRUMENT MAINTENANCE TECHNICIAN OF HVAC (AIR CONDITIONAL )
PREVENTIVE MAINTENANCE
SERVICE & REPAIR
TROUBLE SHOOTING
# : INSTRUMENT MAINTENANCE TECHNICIAN OF AMMONIA PLANT.
RESPONSIBILITY :
• PREVENTIVE MAINTENANCE
• SERVICE, REPAIR & CALIBRATION
• TROUBLE SHOOTING
CERTIFICATION OF TRAINNING
1995 : BASIC INSTRUMENTATION COURSE, PT.PETROKIMIA GRESIK,
1997 : CERTIFICATION OF PAST MASTER MAINTENANCE INSTRUMENT
CLASS 3 By ( H0LDING PT PUSRI )
1997 : TRAINIG PROGRAMMABLE LOGIC CONTROL (PLC).
By ( PT PETROKIMIA )
1997 : TRAINING OPERATE CO2 PLANT By (PT PETROKIMIA )
1999 : ADVANCED TRAINING PROGRAMMABLE LOGIC CONTROL (PLC ).
By OMRON
1999 : NETWORK TRAINING PROGRAMMABLE LOGIC CONTROL ( PLC )
By OMRON
2001 : TRANING DCS TDC- 3000 GENERATION OF 2
By ( PT PETROKIMIA )
2001 : CERTIFICATION OF PAST MASTER MAINTENANCE INSTRUMENT
CLASS 2 By ( HOLDING PT PUSRI )
2001 : TRAINING “ CONTROL AUTOMATIC “ By PT PETROKIMIA GRESIK
2003 : CERTIFICATION OF PAST MASTER MAINTENANCE INSTRUMENT
CLASS 1 By ( H0LDING PT PUSRI )
2005 : TRAINING PROGRAMMABLE LOGIC CONTROL ( PLC ) ALLEN BRADLEY, SEIMENS, OMRON AND TOYO By ( H0LDING PT PUSRI )
mechanical technician
I am working as a Sr. Rotating equipment technician from 11 years . I have good knowledge of rotating equipments,& other equipments used in Gas plants & Petrochemicals. I am leading the group of technicians & to take full responsibility for all the Major jobs in the plant . I am responsible for Safety permits, spare parts, shutdown preparations, & at the same time to teach juniors technician. I can assure you of hard work & Quality jobs from